Call for Price
* Divide a roll into two by slitting lengthways. Can be finished as a sheet by cross-cutting.
| Supported OS | Windows 10 / 8.1, Mac OS X 10.10 – 10.11 / macOS 10.12 – 10.15 |
| Software | Adobe Illustrator (CC – 2020), CorelDRAW Graphics Suite (X7 – X8, 2017 – 2020) |
| Item | Description | |
|---|---|---|
| Feeding unit | Loadable media width | Maximum: 216 mm, Minimum: 100 mm |
| Page size | 1 page size: Maximum: 300 mm, Minimum: 76.2 mm * Maximum 1200 mm when using Sequential Mode |
|
| Loadable media diameter | Maximum: 254 mm (under 10 inch) Inner diameter: 76 mm (3 inch core) |
|
| Loadable media weight | Max. 10 kg | |
| Laminating section | Loadable media width | Maximum: 195 mm, Minimum: 80 mm |
| Loadable media size | Maximum length: 200 mm OR outside diameter under 210 mm Inner diameter: 76 mm (3 inch core) |
|
| Windable media diameter | Maximum outside diameter: 200 mm Inner diameter: 25.4 mm (1 inch core), Core length: 227 mm |
|
| Loadable media weight | Max. 8 kg | |
| Cutting section | Cutout system | Half cutting by cutting plotter (super steel) |
| Drive system | Digital servo | |
| Cutting force | 0.2 – 2.9 N (20 – 300 gf) : 31 steps | |
| Maximum cutting area | 203 mm x 1200 mm 186 mm x 1200 mm (when slitting) |
|
| Maximum cutting speed | 600 mm/s | |
| Separating section | Windable media diameter (*1) | Maximum: 220 mm Inner diameter: 25.4 mm (1 inch core), Core length: 227 mm |
| Slitting section | Slitter | 3 |
| Cross cutting section | Cut | Cross cut |
| Winding section 1 | Windable media width | Maximum: 216 mm, Minimum: 55 mm |
| Windable media diameter (*1) | Maximum: 254 mm Inner diameter: 76 mm (3 inch core) |
|
| Windable media weight | Max. 14 kg (*1) | |
| Winding section 2 | Windable media width | Maximum: 108 mm, Minimum: 55 mm |
| Windable media diameter (*1) | Maximum: 220 mm Inner diameter: 76 mm (3 inch core) |
|
| Windable media weight | Max. 7 kg (*1) | |
| Main Unit Specifications | Interface | USB2.0 (High Speed), Network (Ethernet 10BASE-T / 100BASE-TX) |
| LCD display | Graphtec type (128 dots x 64 dots) | |
| Power source | AC100-120V, AC200-240V, 50/60Hz (Automatic changeover) | |
| Power consumption | Max. 170VA | |
| Operating environment | 10 – 35℃, 35 – 75% R.H. (non-condensing) | |
| Guaranteed accuracy environment | 16 – 32℃, 35 – 70% R.H. (non-condensing) | |
| External dimensions (approx.) | 1904 (W) × 994 (H) × 1297 (D) mm | |
| Weight (approx.) | 151kg | |
| Item | Q’ty | Item | Q’ty |
|---|---|---|---|
| Power cable | 1 | Cutter unit (CE6000-40DLC) (*2) | 1 set |
| Flange set for paper media (square bar w/ scale) | 1 set | Flange set for paper media (square bar w/o scale) | 2 sets |
| Flange set for lamination roll (square bar) | 1 set | Flange set for rewinding lamination (round bar) | 1 set |
| Flange set for stripping (round bar) | 1 set | Dancer roller 1, 2 (6 inch) | 1 set |
| Dancer roller 1, 2 (4 inch) | 1 set | Attachment for cutting plotter | 1 set |
| Slitter guide (L / R) | 1 set | Stand for DLC1000 | 1 set |
| DVD (Users manual, Windows driver, CM for DLC) | 1 | Printed document (Setup manual, Starting guide, Safety guide, Cautions) | 1 each |
| Item | Part No. | Description |
|---|---|---|
| DLC1000 Unwinder Flange Set | OPH-A28 | Flange set |
| DLC1000 Rewinder Flange | OPH-A29 | For 53.5 mm media |
| Box Set | OPH-A31 | Media receiving box |
Overview
Reviews
There are no reviews yet.